【供应铜矿砂金刚砂薛先生136/6726/9191】金刚砂冶炼工艺

刚玉冶炼一般有三种方法：

1、流放发：连续生产，自动化程度高，但投资大，结构复杂，适合于大功率冶炼。

2、倾倒法：连续生产，机械化程度高，投资较小，生产效率好，目前使用普遍的一种方法。

3、固定法(熔块法)：间断生产，机械化程度低，但投资小，设备简单，工艺方便，是目前小型磨料厂进行刚玉冶炼的主要方法。

浙江/浙江杭州/福建/福建福州/江西/江西南昌

湖南/湖南长沙/湖北/湖北武汉/河南/河南郑州

安徽/安徽合肥/江苏/江苏南京/上海

山东/菏泽/枣庄/济宁/广东韶关

There are three ways of smelting.

Exilic: continuous production, high degree of automation, but large investment and complex structure suitable for high power smelting.

Dumping method: continuous production, high degree of mechanization, low investment, good production efficiency and current use of a common method.

3, fixed method (frit method) : continuous production, low degree of mechanization, but the small investment, simple equipment, process is convenient, is the main method of corundum smelting small abrasive factory.

金刚砂应用

金刚砂适用于多种领域，常规情况下，它能被重复使用５次，如果５次过后还没有失去它的切割能力，循环次数可以更多，在没有切割能力后，金刚砂还可以回收应用到建筑行业，作为水泥添加料，无须更换现有的喷砂装置，价位适中，性价比高。

1、研磨抛光；研磨级磨料，应用于显象管、光学玻璃、单晶硅、镜片、钟表用玻璃、水晶玻璃、玉器等领域的自由研磨，是国内普遍采用的优质研磨材料。

2、树脂磨具；金刚砂磨料具有颜色合适、硬度好、有韧性、合适的颗粒断面类型和刃口保持度，可作填充剂替代20%-30%棕刚玉应用于树脂磨具，效果理想。

3、涂覆磨具；金刚砂磨料是砂纸、纱布等生产厂家的生产原料。

4、过滤介质；采用粒状金刚砂作过滤床的底层介质，净化饮用水或废水，是国内外新型的水过滤材料，尤其经过水力精心筛选，机械加工，筛选分级等方法制成的研磨材料，主要用于研磨玻璃制品制品，工业除锈及水切割等。

5、抛光除锈；抛光砂磨料介壳状断口，硬度适中，韧性好，边角锋利，可在不断粉碎分级中形成新的棱角和边刃，使其研磨能力优于其它磨料，它具有硬度高、比重大、化学性质稳定及其特有的自锐性优点，使它具备了其它磨料、人造磨料所不可替代的优势。

6、地坪材料；具有硬度高、比重大、化学性质稳定及特有的自锐性优点，使它具备了其它磨料、人造磨料所不可代替的优势，成为研磨抛光、喷砂除锈、水切割、水过滤介质、耐磨地坪的理想材料，可作为修筑高速公路路面、飞机跑道、码头、停车场、工业地坪、体育场地等耐磨材料。

Silicon carbide is suitable for a variety of fields, normally, it can be reused for 5 times, if after the 5 times is not lost its cutting ability, can more cycles, after no cutting ability, emery can also recycle used in construction industry, as cement additive, do not need to replace the existing sand blasting equipment, price moderate, high cost performance.

Grinding and polishing, abrasive abrasive, applied to the tube, optical glass, monocrystalline silicon, lenses, clocks with glass, crystal glass, jade in areas such as free grinding, is a widely used high quality grinding material.

Resin abrasive, carborundum abrasive has color appropriate, good hardness and toughness, suitable particle cross section type and edge keeping degree, as a filler to replace 20% 30% corundum used in resin grinding tool, the effect is ideal.

Coated abrasive tools - emery abrasive is the raw material of production manufacturers such as sandpaper and gauze.

Filter medium - granular emery used filter bed, the bottom of the medium cleaning water or wastewater, is a new type of water filtration materials at home and abroad, especially after hydraulic careful screening, mechanical processing, screening and classifying the grinding materials, mainly used for grinding glass products, industrial cleaning and water cut, etc.

Polishing rust removing, polishing abrasive abrasive conchoidal fracture, moderate hardness, good toughness and sharp edges, can form new in continuous grinding classification and edge blade edges and corners, to make it better than other abrasive grinding ability, it has high hardness, better than the big, stable chemical properties and its peculiar advantages since the sharpness, make it with the other abrasive, artificial abrasive has an irreplaceable advantage.